Ubiquiti UniFi Pro Max 24 PoE - 400W PoE++, Layer 3 & Etherlighting

The Ubiquiti UniFi Pro Max 24 PoE is a powerful 24-port Layer 3 managed switch designed for high-performance network deployments requiring PoE+ and PoE++ connectivity. With 400W total PoE availability, 2.5GbE ports, 10G SFP+ uplinks, Etherlighting™, and advanced Layer 3 networking features, the USW-Pro-Max-24-PoE provides a strong foundation for modern UniFi networks.

High-Power PoE++ Connectivity

The UniFi Pro Max 24 PoE provides 24 Ethernet ports with a combination of 1GbE and 2.5GbE connectivity:

• 16 × 1GbE RJ45 ports - 8 PoE+ and 8 PoE++
• 8 × 2.5GbE RJ45 ports - all PoE++
• Up to 60W PoE++ output per port
• 400W total PoE availability

This combination provides flexible high-power PoE connectivity across compatible network devices.

2.5GbE and 10G Uplinks

The switch includes 8 × 2.5GbE RJ45 ports supporting 2.5G, 1G, 100M, and 10M connections, along with 2 × 10G SFP+ ports supporting 10G and 1G.

With a 112Gbps switching capacity, 56Gbps total non-blocking throughput, and an 83 Mpps forwarding rate, the UniFi Pro Max 24 PoE is built for demanding network traffic.

Layer 3 Networking

The USW-Pro-Max-24-PoE supports Layer 3 networking capabilities including:

• Local DHCP Server
• DHCP Relay
• Inter-VLAN Routing
• Static Routing
• Up to 256 IPv4 Static Routes
• Support for up to 1,000 VLANs

Advanced Layer 2 Features

The switch provides a broad range of Layer 2 management and control features, including LACP Port Aggregation, STP & RSTP, DSCP QoS, IGMP Snooping, 802.1X Control, DHCP Snooping & Guarding, Storm Control, Flow Control, Port Isolation, Port Mirroring, Voice VLAN, LLDP-MED, Loop Protection, and Jumbo Frames.

It also supports MAC-based and IP-based access controls, device isolation, port restrictions, multicast and broadcast rate limiting, and network isolation.

Etherlighting™

Etherlighting™ provides illuminated Ethernet and SFP+ ports, adding visual port identification to the UniFi Pro Max 24 PoE.

The switch supports Etherlighting on both Ethernet and SFP+ interfaces.

Pro AV Support

The UniFi Pro Max 24 PoE includes Pro AV Profiles for Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, and Crestron environments.

Advanced IGMP configuration is also supported, including Querier, Fast Leave, and Router Port functionality.

Rack-Mount Design

The UniFi Pro Max 24 PoE features a 1U rack-mount form factor with an SGCC steel enclosure and mounting material. It supports rack depths from 400 to 1200 mm.

A 1.3-inch touchscreen LCM display provides an integrated interface on the device.

Power and Redundancy

The switch uses an internal 550W AC/DC power supply with a universal 100-240V AC input and supports a USP RPS DC input for DC power backup.

Maximum power consumption is 50W excluding PoE output and 450W including PoE output.

Performance and Capacity

• Switching Capacity: 112 Gbps
• Total Non-Blocking Throughput: 56 Gbps
• Forwarding Rate: 83 Mpps
• MAC Address Table: 16,000
• Supported VLANs: 1,000
• IPv4 Static Routes: 256
• Packet Buffer: 1.5 MB

Technical Specifications

• Model: USW-Pro-Max-24-PoE
• Product Series: UniFi Pro Max
• Ports: 16 × 1GbE RJ45 + 8 × 2.5GbE RJ45
• 10G SFP+: 2
• PoE+: 8 ports
• PoE++: 16 ports
• Maximum PoE per Port: 60W
• Total PoE Availability: 400W
• Layer 3: Yes
• Etherlighting™: Yes
• Form Factor: 1U Rack Mount
• Power Supply: Internal 550W AC/DC
• Input Voltage: 100-240V AC
• Dimensions: 442 × 325 × 44 mm
• Weight: 5.1 kg without mounting brackets
• Weight with Mounting Brackets: 5.2 kg
• Enclosure: SGCC Steel
• Operating Temperature: -5 to 40°C
• Operating Humidity: 10 to 90% noncondensing
• LCM Display: 1.3-inch touchscreen
• Certifications: CE, FCC, IC, Anatel: 06374-24-08356
• NDAA Compliant: Yes
• Application Requirement: UniFi Network version 8.0.24 and later

FAQ

How many PoE ports does the UniFi Pro Max 24 PoE have?
It has 24 PoE-capable RJ45 ports: 8 PoE+ ports and 16 PoE++ ports.

How much total PoE power is available?
The switch provides up to 400W of total PoE availability.

What is the maximum PoE++ output per port?
PoE++ supports up to 60W per port.

Does the switch support 2.5GbE?
Yes. It has 8 × 2.5GbE RJ45 ports.

Does it have 10G uplinks?
Yes. It includes 2 × 10G SFP+ ports supporting 10G and 1G.

Does the switch support Layer 3 features?
Yes. It supports DHCP Server, DHCP Relay, Inter-VLAN Routing, Static Routing, and up to 256 IPv4 Static Routes.

What software is required?
The switch requires UniFi Network version 8.0.24 or later.

Warranty

The Ubiquiti UniFi Pro Max 24 PoE is covered by a 1-year full warranty.

Choose the Ubiquiti UniFi Pro Max 24 PoE from Green DARA for a powerful Layer 3 network switch with 400W PoE++, 2.5GbE connectivity, 10G SFP+ uplinks, and Etherlighting™. Available in Jordan at a competitive price with full warranty.